The Department is headed by Dr. Nitin Ahire. The present faculty strength of the department is 10, comprising one associate professor and nine assistant professors. The faculty profile consists of qualified and competent members, including those with doctorates and postgraduate degrees. Some faculty members are also pursuing their doctoral degrees. All laboratory assistants are skilled, experienced, and well-qualified.
The faculty members of the Electronics and Computer Engineering Department are actively involved not only in updating the curriculum but also in continuously enhancing laboratory facilities to keep pace with recent technological advancements in the field. The laboratories are regularly upgraded with modern equipment, and emphasis is placed on design-oriented and hands-on experiments. Comprehensive lab manuals have been developed for all laboratories. In line with technological innovations, new facilities are added every year to equip students with the practical knowledge and skills required to meet future industry demands.
To stay updated with emerging trends, the department regularly organizes technical programs such as workshops, seminars, and guest lectures. Faculty members are encouraged and supported to participate in training programs, certification courses, and higher studies for continuous professional development.
The department admits students through recognized entrance examinations such as MHT-CET and JEE. Students maintain a good academic record and actively participate in co-curricular and extracurricular activities at both the institute and intercollegiate levels. A significant number of students are successfully placed in reputed organizations, while others pursue higher education in premier institutions.
The details of various laboratories are provided below.
This laboratory helps the students to develop their knowledge on processor architecture and the programming skills. This laboratory have the hardware which includes 8085 Microprocessor trainer kits, 8086 Microprocessor trainer kits, 8051 Microcontroller trainer kits, ARM Controllers trainer kits, Arduino Kits and Raspberry Pi kits with interfacing cards and software's. This laboratory provides facilities for hands-on practice on interfacing of I/O devices, A/D and D/A conversions, stepper motor, traffic light control system etc. The features and facilities available in this laboratory help the students to do their projects and enhance their knowledge on the latest trends and technologies. Students from other programmes also make use of this laboratory.
LAB facilities:
1) 25 computers with Windows 10 & Ubuntu 18.04.4 LTS, Processor – Intel (R) core ™ i3 -9100 CPU@ 3.60GHz, 64-bit, RAM 16GB, HDD-1TB
2) High speed internet connection (10Mbps) to all the computers
3) One dedicated LASER printer
4) One dedicated Projector
5) One dedicated white board
Available Softwares :
1) OCTAVE 4.2.1
2) Anaconda-Python 3.8.3
3) Octave 4.2.1
4) Eclipse Java Photon
5) Zen map 7.60
6) Cisco-Packet-tracer
7) Wireshark 2.0.1
8) Flash Magic 10.96
9) Crossware Embedded Development Tools
10) Keil uvision3
11) Arduino IDE 1.6.9
12) Emulator 8086 4.08
Laboratory Utilization :
1) Sem V - Subject "Microprocessor and Peripherals Interfacing"
2) Sem VI - Subject "Microcontrollersand Applications"
3) Sem III - Subject "Object Oriented programming methods"
4) Sem VII - Subject "Internet communication engineering"
5) Sem VII - Subject "Neural networks and Fuzzy Logic"
Signal processing laboratory use bythe students to learn, analyse and design the techniques that give core knowledge for signal processing, Image processing and communication.Signal Processing lab is equipped with 30workstations whichare installOctave,Anaconda Python,NS2, LT Spice, Multisim, Xilinx, Eagle, Winspice, Java, Eclipse and NG Spice software. This lab also facilitates the students to develop their BE Projects.
LAB facilities:
1) 30 Computers with Windows 7 (Service Pack 1) 64-bits Operating System
2) D-Link 24 port GIGABYTE Switch
3) HP Laser Jet P1108
4) Projector
Lab has all equipments and components which helps students to learn basic analog electronics.This laboratoryis an introductory laboratory that introduces the students about basic components such as resistors, inductors, transistors used in analog electronic circuits. This lab is intended for the beginners to educate them about the characteristics, applications of electronic devices, such as Diode, BJT, FET for practicing their theoretical knowledge by designing.
The lab includes all equipments such as Oscilloscopes, Function Generators, Digital Storage Oscilloscopes, Digital Multimeters and Power Supplies so that the students can perform experiments and test their projects.
Available Softwares :
1) Multisim (10 users)
Laboratory Utilization :
1) Sem III EXTC - Subject "Electronic Devices & Circuits - I"
2) Sem IV EXTC - Subject "Electronic Devices & Circuits - II"
3) Sem III COMP - Subject "BEL Lab"
Digital System DesignLab helps the students to build the knowledge of designing basic digital systemsbyimplementing the circuits on their own using breadboard and checking the output using trainer kits available in the lab. Students also use the lab for designing and implementing circuits based on IC 555 and IC 741. The lab also facilitates the students todevelop their mini Projects. The lab has the hardware which includes
LAB facilities:
1) Analog / Digital Trainer Kits
2) IC Tester, Power supply (±15V, 500mA & ±5V, 1A)
3) Digital Multimeters, Control System Educational Kits
4) Instrumentation Amplifier
Laboratory Utilization :
1) Sem III EXTC - Subject "Digital System Design Lab"
2) Sem IV EXTC - Subject "Linear Integrated Circuits Lab"
3) Sem III IT - Subject "Digital Design Lab"
4) Sem III COMP - Subject "Digital System Lab"
Antenna & Microwave Engineeringlaboratory encourages students to learn about different Antennas and their radiation patterns. Students also enhance their knowledge towards fundamentals of networking as well learn about how to apply different compression techniques on image and text. Students learn to develop their software skills by using different programming languages aiding to the availability of different software’s.
LAB facilities:
1) 25Computers withWindows 7 (Service Pack 1) 64-bits Operating System(Processor: Intel Core i5-3330CPU @ 3.00 GHz to 3.20GHz,RAM: 4GB DDR3, ROM: 320GB / 500GB)
2) D-Link 24 port GIGABYTE Switch, Graphic card(Asus Gt710 2GB), Antenna Trainer Kit,
3) Digital Signal Oscilloscope (60 MHz, Two channel DSO with LCD Display)
4) Microwave Test Benches, RF Trainer Kits with Signal Generator, Doppler Radar Trainer
5) TP-LINK 2.4GHz Wireless Router, One dedicated LASER printer, One dedicated Projector
Available Softwares :
1) Octave 4.2.1, Anaconda Python, Cisco-Packet-tracer, Turbo C, Wire shark,
2) VMware, Xilinx, Eagle, Kiel, Flash magic, Win Spice
Laboratory Utilization :
1) Sem VIII EXTC - Subject "Internet and Voice Communication"
2) Sem VI EXTC - Subject "Antenna and Radio Wave Propagation"
3) Sem VII EXTC - Subject "Data Compression And Encryption"
4) Sem VII EXTC - Subject "Neural Network And Fuzzy Logic"
5) Sem V EXTC - Subject "Data Compression And Encryption"
Communication lab encourages students to become familiar with various analog and digital modulation and demodulationtechniques. The students are trained tounderstand different characteristics of optical sourcesand detectorsand measure different optical fiber parameters using single mode and multimode optical fibers, able to establish wireless communication link between satellite transmitting and receiving Earth Station. Understanding complex communication systems and implementing it is made easy with the help of appropriate equipments and educational kits available in thelaboratory.
LAB facilities:
1) HP Laser jet printer 1108
2) CASIO LCD Projector
3) D-Link Switch (24-PORT)
HARDWARE DETAILS:
1) Computers (Intel core i3, 8thgeneration , 4GB RAM, 1Tb HDD, 18.5 inch and Intel core i3, 7thgeneration , 4GB RAM, 1Tb HDD, 18.5inch)
2) Educational Kits for Analogcommunication, Digitalcommunication, Satellite communication, Opticalcommunication
3) Spectrum Analyzer(1 GHZ & 3GHZ)
4) Digital StorageOscilloscope(60 MHz and 100 MHz)
5) Function Generator(2MHz and 10 MHz)
6) Cathode Ray Oscilloscope(30 MHz)
SOFTWARE DETAILS:
1) Dual OS(Windows 10, Ubuntu16.04), Anaconda Python 3.5.1, Octave4.2.1’
2) Xilinx4.2.1, Cisco Packet Tracer6.1, Turbo C4.0, Wire shark4.0
3) Eagle2.0.1, Keil3, Flash Magic4.31, LT Spice, Java8, VMware Workstation11.0.0
4) SCILAB5.5.2, Digilent Software1.0.203, NSG2, Net kit16
Laboratory Utilization :
1) Sem V EXTC - Subject "Digital Communication Lab"
2) Sem VII EXTC - Subject "Advanced Communication Engineering Lab-II"
3) Sem VII EXTC - Subject "Final Year Projects"
4) Sem IV EXTC - Subject "Principles of Communication Engineering Lab"
5) Sem VI EXTC - Subject "Computer communication and Networking Lab"
6) Sem VIII EXTC - Subject "Satellite Communication and Networks Lab"
7) Sem VIII EXTC - Subject "Final Year Projects"
